Broadband PLC Deployment in the Low Voltage Grid
tipo de documento semantico ckh_publication
Ficheros
Resumen
Los nuevos requisitos que se están exigiendo a las tecnologías de comunicación utilizadas en la red eléctrica de baja tensión (BT) han hecho que surjan soluciones como el uso de tecnologías Broadband over Power Lines (BPL) como Narrowband Smart Meter Concentrator (NBSMC). Este proyecto se centra en el estudio de la aplicabilidad de esta solución en la red de BT de i-DE según diferentes criterios. Para ello, se ha realizado un análisis de las pruebas de campo, se ha seleccionado el conjunto de Centros de Transformación (CT) aptos para esta implementación y se han asignado puntuaciones según su nivel de aplicabilidad. Finalmente, se han seleccionado las ubicaciones donde se realizará el primer proyecto piloto de esta solución. Los resultados obtenidos indican que el principal parámetro que limita el uso de BPL en la red de BT es la longitud del cable entre nodos. También se ha comprobado que este caso de estudio podría ser adecuado para un subconjunto de CTs en el que están conectados el 17,65% de los contadores inteligentes (CI) de i-DE, principalmente en zonas con alta densidad de población. El sistema de puntuación establecido permite a i-DE elegir el conjunto de CTs en los que puede desplegarse BPL en este escenario, según el nivel de exigencia que impone a la aplicabilidad. Por último, se eligieron las ubicaciones adecuadas para el despliegue del proyecto piloto, teniendo en cuenta tanto los criterios de BPL como los requisitos actuales de i-DE.
The new requirements that are being demanded of the communication technologies used in the low voltage (LV) electricity grid have led to the emergence of solutions such as the use of Broadband Over Power Lines (BPL) technologies as Narrow-band Smart Meter Concentrator (NBSMC). This project is focused on the study of the applicability of this solution in i-DE's LV grid according to different criteria. To this end, an analysis of field tests has been carried out, the set of Secondary Substations (SS) suitable for this implementation has been selected and scores have been assigned according to their level of applicability. Finally, the locations where the first pilot project on this solution will be carried out have been selected. The results obtained indicate that the main parameter limiting the use of BPL at LV grid is the cable length between nodes. It has also been found that this use case could be suitable for a subset of SS in which 17.65% of i-DE Smart Meters (SM) are connected, mainly in densely populated areas. The established scoring system allows i-DE to choose the set of SS in which BPL in this scenario can be deployed, according to the level of demand it imposes on applicability. Finally, the appropriate locations for the deployment of the pilot project were chosen, considering both BPL criteria and i-DE's current requirements.
Palabras clave
Shared with: